GUJCON-PRF
GUJCON - PRF is specially engineered 06 mm length Nylon 6 fiber for providing secondary fiber reinforcement in plaster.
A breakthrough in secondary reinforcement.
Development based on extensive Research and Application trials.
Unique and state-of-the-art next generation products for rendering long lasting solutions to some of the teething problems of construction and infrastructure industries.
Superior to other secondary reinforcement Fibre products.
Reliable secondary reinforcement material.
Sr. no. |
No. Property |
GUJCON-PRF |
1 |
Material |
100% Virgin N ylon 6 fiber |
2 |
Fiber Cross Section |
Trilobal |
3 |
Fiber Length |
6 mm |
4 |
Denier / Filament |
3.0 |
5 |
Sp. Gravity |
1.13 |
6 |
Color |
Brilliantly White |
7 |
Melting Point |
220 degree centigrade |
8 |
Chemical Resistance |
Very good against alkalis hydrocarbons |
Test Methods
- Fiber Cross Section - Scanning Electron Microscope
- Fiber length - ISO: 6989: 1981
- Denier /Filament - ASTM D: 1577: 01
- Melting Point - Differential Scanning Calorimeter
Application
- Plaster
- Shotcrete, Gunniting
- Waterproofing
- Water retaining structures
- Pre-cast structures
Advantages
- Reduction in plastic shrinkage and long term - temperature shrinkage cracking
- Reduces rebound loss
- Reduces water permeability
- Reduces damping in structures and saves on repairing - repainting cost
- Gives better surface finish
- Increases strength & durability of plaster
Dosage
- Use 100 gm GUJCON - PRF / 50 kg cement bag
Direction for use
Manual mixing
- For each 50 kg cement bag, sprinkle 100 gm GUJCON - PRF in required quantity of water in bucket / container and stir till fibers are uniformly dispersed
- Pour the entire water + fiber content of bucket in dry mortar mixture and mix thoroughly till homogeneous mortar mix is obtained.
Mixing in Drum Mixer
- For each 50 kg bag of cement, sprinkle 100 gm GUJCON - PRF in required quantity of water in bucket / container and stir till fibers are uniformly dispersed.
- Prepare required dry mix of mortar in site Mixer Drum. Pour entire water + fiber content from bucket / container in to Mixer Drum and rotate for few minutes till homogeneous mortar mix is obtained.